Learning Power Point 2010 By yourself (Part I)

1.Introduction

PowerPoint 2010 is a presentation software that allows you to create dynamic slide presentations that may include animation, narration, images, videos, and more. In this lesson, you will learn your way around the PowerPoint 2010 environment, including getting to know the new Backstage view.

learning power point 2010 by yourself (Part II)

Dear Volume Visitor, the last post i have show a few about the part I on Power Point 2010, and today i have post the second part, i will go on it until it finish. Now let go on our lesson.

Study Power Point by yourself (Slide Show basics Part I)

In Last post i have show about the Introduction and Interface of Power Point 2010 in this post i will introduce you about slide basics. let go !

 

Study Power Point by yourself (SlideShow basics Part II)

V. To use a blank slide:

 

For more control over your content, you may prefer a blank slide (a slide without placeholders) over one of the existing layouts. Blank slides can be customized by adding your own text boxes, pictures, charts, and more.

Study Power Point by yourself (SlideShow basics Part II)

V. To use a blank slide:

For more control over your content, you may prefer a blank slide (a slide without placeholders) over one of the existing layouts. Blank slides can be customized by adding your own text boxes, pictures, charts, and more.

V.1 Select Blank from the menu of layout options.

VI. Working with slides

VI.1 To insert a new slide:

1.1 From the Home tab, click the bottom half of the New Slide command to open the menu of slide layout options.

1.2 Select the slide you want to insert.

1.3 A new slide will be added your presentation.

To instantly add a slide that uses the same layout as the one you have selected, simply click the top half of the New Slide command.

VII. Copy and paste a slideshow: 

1. On the Slides tab in the left pane, select the slide you wish to copy.

2. Click the Copy command on the Home tab. You can also right-click your selection and choose Copy.

3. In the left pane, click just below a slide (or between two slides) to choose the location where you want the copy to appear. A horizontal insertion point will mark the location.

 4. Click the Paste command on the Home tab. You can also right-click and choose Paste. The copied slide will appear.

* To select multiple slides, press and hold Ctrl on your keyboard, and click the slides you wish to select.

VIII.To duplicate a slide:

An alternative to Copy and Paste, Duplicate copies the selected slide and, in one step, pastes it directly underneath. This feature does not allow you to choose the location of the copied slide (nor does it offer Paste Options for advanced users), so it is more convenient for quickly inserting similar slides.

1. Select the slide you wish to duplicate.

2. Click the New Slide command.

3. Choose Duplicate Selected Slides from the drop-down menu.

4. A copy of the selected slide appears underneath the original.

* To delete a slide:

Select the slide you wish to delete.

Press the Delete or Backspace key on your keyboard.

To be continue…

Study Power Point by yourself (Slide Show basics Part I)

In Last post i have show about the Introduction and Interface of Power Point 2010 in this post i will introduce you about slide basics. let go !

I. Slide basics

Every PowerPoint presentation is composed of a series of slides. To begin creating a slide show, you’ll need to know the basics of working with slides. You’ll need to feel comfortable with tasks such as inserting a new slide, changing the layout of a slide, arranging existing slides, changing slide view, and adding notes to a slide. 

I.1 About slides

Slides contain placeholders, which are areas on the slide that are enclosed by dotted borders. Placeholders can contain many different items, including text, pictures, and charts. Some placeholders have placeholder text, or text that you can replace. They also have thumbnail-sized icons that represent specific commands such as Insert Picture, Insert Chart, and Insert ClipArt. In PowerPoint, hover over each icon to see the type of content you can insert in a placeholder.

I.2 About slide layouts

Placeholders are arranged in different layouts that can be applied to existing slides, or chosen when you insert a new slide. A slide layout arranges your content using different types of placeholders, depending on what kind of information you might want to include in your presentation.

In the example above, the layout is called Title and Content and includes title and content placeholders. While each layout has a descriptive name, you can also tell from the image of the layout how the placeholders will be arranged.

II. Customizing slide layouts

II.1 To change the layout of an existing slide:

1. Select the slide you wish to change.

2. Click the Layout command in the Slides group on the Home tab. A menu will appear with your options.

3. Choose a layout from the menu. The slide will change in the presentation.

Choosing a layout.

III. To delete a placeholder:

You can easily customize your layout by deleting unwanted or “extra” placeholders from any slide.

1. Position your mouse on the dotted border of the placeholder so it changes to a cross with arrows cursor with directional arrows.

2. Click the border to select it.

3. Press Backspace or Delete on your keyboard. The placeholder will be removed from the slide.

IV. To add a text box:

Text boxes allow you to add to your current layout, so you can place text wherever you want on your slide.

1. From the Insert tab, click the Text Box command. 

2. Your cursor will turn into an upside-down cross text box cursor.

3. Click, hold, and drag your mouse to draw a text box. A text box will appear.

* Explore our Text Basics lesson to learn more about inserting and using text boxes in PowerPoint 2010.

To be continue..

learning power point 2010 by yourself (Part II)

Dear Volume Visitor, the last post i have show a few about the part I on Power Point 2010, and today i have post the second part, i will go on it until it finish. Now let go on our lesson.

5.Backstage view

Backstage view gives you various options for saving, opening a file, printing, or sharing your document. It is similar to the Office Button Menu from PowerPoint 2007 or the File Menu from earlier versions of PowerPoint. However, instead of just a menu it is a full-page view, which makes it easier to work with.

To get to Backstage view:

1.Click the File tab.

2.You can choose an option on the left side of the page.

3.To get back to your document, just click any tab on the Ribbon.

* Click the buttons in the interactive below to learn about the different things you can do in Backstage view.

6.Creating and opening presentations

Video: Creating Presentations in PowerPoint 2010

Launch video!

PowerPoint files are called presentations. Whenever you start a new project in PowerPoint, you’ll need to create a new presentation. You’ll also need to know how to open an existing presentation.

6.1 To create a new, blank presentation:

1.Click the File tab. This takes you to Backstage view.

Select New.

2.Select Blank presentation under Available Templates and Themes. It will be highlighted by default.

3.Click Create. A new, blank presentation appears in the PowerPoint window.

To save time, you can create your presentation from an Office.com template, which you can also select under Available Templates and Themes.

7.To open an existing presentation:

1.Click the File tab. This takes you to Backstage view.

2.Select Open. The Open dialog box appears.

3.Select your desired presentation, then click Open.

If you have opened the existing presentation recently, it may be easier to choose Recent from the File tab instead of Open to search for your presentation.

8.Compatibility mode

Sometimes you may need to work with presentations that were created in earlier versions of Microsoft PowerPoint, such as PowerPoint 2003 or PowerPoint 2000. When you open these kinds of presentations, they will appear in Compatibility mode.

Compatibility mode disables certain features, so you’ll only be able to access commands found in the program that was used to create the presentation. For example, if you open a presentation created in PowerPoint 2003, you can only use tabs and commands found in PowerPoint 2003.

In the image below, the workbook has opened in Compatibility mode. Many of the newer slide transitions have been disabled, and only the 2003 transitions are available.

In order to exit Compatibility mode, you’ll need to convert the presentation to the current version type. However, if you’re collaborating with others who only have access to an earlier version of PowerPoint, it’s best to leave the presentation in Compatibility mode so the format will not change.

9.To convert a presentation:

If you want access to all PowerPoint 2010 features, you can convert the presentation to the 2010 file format.

Note that converting a file may cause some changes to the original layout of the presentation.

1.Click the File tab to access Backstage view.

2.Locate and select the Convert command.

3.The Save As dialog box will appear. Select the location where you wish to save the workbook, enter a file name for the presentation, and click Save.

4.The presentation will be converted to the newest file type.

10.Challenge!

1.Open PowerPoint 2010 on your computer. A new blank presentation will appear on the screen.

2.Try minimizing and maximizing the Ribbon.

3.Click through all of the tabs, and notice how the Ribbon options change.

4.Try switching page views.

5.Add any commands you wish to the Quick Access Toolbar.

6.Close PowerPoint without saving the presentation.

previous next.

To be continue…..

Learning Power Point 2010 By yourself Part I

1.Introduction

PowerPoint 2010 is a presentation software that allows you to create dynamic slide presentations that may include animation, narration, images, videos, and more. In this lesson, you will learn your way around the PowerPoint 2010 environment, including getting to know the new Backstage view.

We will also show you how to use and modify the Ribbon and the Quick Access Toolbar, in addition to learning how to create new presentations and open existing files. After this lesson, you will be ready to get started on your first presentation.

2.Getting to know PowerPoint 2010

If you are familiar with PowerPoint 2007, then you will notice that there are not too many changes to the 2010 interface other than the Backstage View, which we will cover later in this lesson.

However, if you are new to PowerPoint, you will first need to take some time to learn about slides and how to navigate through PowerPoint.How to navigate PowerPoint to create a slide presentation PowerPoint uses slides to build a presentation. In order to create an engaging presentation, PowerPoint allows you to add text, bulleted lists, images, charts, video, and more to your slides. You can add as many slides as you’d like to a presentation, and at any time you can view or play back your presentation by selecting one of the Slide Show play options.

3. Working with Environment your Power Point

The Ribbon and Quick Access Toolbar are where you will find the commands you need to perform common tasks in PowerPoint. If you are familiar with PowerPoint 2007, you will find that the main difference in the PowerPoint 2010 Ribbon is that commands such as Open and Print are now housed in Backstage view.

The Ribbon

The Ribbon contains multiple tabs, each with several groups of commands. Some tabs, like “Drawing Tools” or “Table Tools”, may appear only when you are working with certain items like images or tables. In addition, you can add your own customized tabs that contain your favorite commands.

PowerPoint Ribbon

Certain programs, such as Adobe Acrobat Reader, may install additional tabs to the Ribbon. These tabs are called Add-ins.

3.1.To customize the Ribbon:

You can customize the Ribbon by creating your own tabs that house your desired commands. Commands are always housed within a group, and you can create as many groups as you need to keep your tabs organized. In addition, you can even add commands to any of the default tabs, as long as you create a custom group within the tab.

1.Right-click the Ribbon, and select Customize the Ribbon. A dialog box will appear.

2.Click New Tab. A new tab will be created with a new group inside it.

3.Make sure the new group is selected.

4.Select a command from the list on the left, then click Add. You can also drag commands directly into a group.

5.When you are done adding commands, click OK.

If you do not see the command you want, click on the Choose commands drop-down box, and select All Commands.

3.2.To minimize and maximize the Ribbon:

he Ribbon is designed to be easy to use and responsive to your current task, but if you find it is taking up too much of your screen space you can minimize it.

1.Click the arrow in the upper-right corner of the Ribbon to minimize it.

2.To maximize the Ribbon, click the arrow again

When the Ribbon is minimized, you can make it reappear by clicking on a tab. However, the Ribbon will disappear again when you are not using it.

4.The Quick Access Toolbar

The Quick Access Toolbar is located above the Ribbon, and it lets you access common commands no matter which tab you are on. By default, it shows the Save, Undo, and Repeat commands. You can add other commands to make it more convenient for you.

4.1.To add commands to the Quick Access Toolbar:

1.Click the drop-down arrow to the right of the Quick Access Toolbar.

2.Select the command you wish to add from the drop-down menu. To choose from more commands, select More Commands.

To be continue….

Microsoft releases Windows 9 Professional Service pack 1 for testing (Eng/x64/Single Link)

Windows 9 Professional (Eng/x64/Single Link) May 2014,  the latest edition windows that will be published by microsoft is this one. The newest and more power up when we compare with windows 8.1 edition. Microsoft will officially published this version in 2015, then what it this? Just download and you will be know, this one has the concept and interface of windows 9. Just see picture below to make you believe of me.

Windows 9 Pro 2014 Download Full Version

 Size : 5.1 Gb

 Version : Professional

 Language : English

 Medicine : Include – PreActivated

 OS Support : Win 9 x64 Bit

 Type File : Rar/ISO

 Code File : 9pro.may2014

 Password : No 

 Updated : 6 Mei 2014

 Publisher : Microsoft/MOD

Install Screen

Shutting Down Screen

Login Screen

Interface

System Properties

Software included:
– Bit Torrent 7.8.2 Build 30417
– CCleaner Professional 4.08.4428
– CPU-Z 1.68
– Adobe Flash Player ActiveX 12
– Aimp Player 3.55
– Adobe Reader 11.4
– Adobe Flash Player 12.0.235
– Autorun Virus Remover v3.3
– Boot Screen Win9 By DiLshad Sys
– Firefox 28 Final
– Glary Utilities 4
– DirectX32
– FileZilla FileZilla 3.8.0
– Notepad++ 6.5
– Skype 6.11.0.102
– GOM Player 2.2.57.5189
– Hotspot Shield 3.37
– Internet Explorer 11 Final X64
– Internet Download Manager 6.12 Final
– NET Framework Version AIO
– K-Lite Codec Pack 10.15 (Full)
– Ultra ISO 9.8.1
– USB Disk Security 6.2.0.432
– Team Viewer 9
– USB Safely Remove 5.2 Final
– VLC Media Player 2.1.3
– Visual C++ 2008 SP1 Redis
– Microsoft Silverlight 5.1.10411.0 Final x64
– Java Runtime Environment 1.7.0.45
– Visual C++ 2005 Redis
– Visual C++ 2005 SP1_Redis
– Winrar 5.0
– Visual C++ 2010 Redis
– Visual C++ 2012 Redis
– Visual C++ 2008 Redis
– Themes included in windows 9
– 12 New Themes
– Whats’ New in this version??
– Disable Tool Tips
– Disable Autorun Drive
– Disable UAC
– Disable Hibernate
– Don’t mark new applications
– On Right Click Freeware Sys
– Copy to Move to on right click
– Boot Win 9 Edition
– Advanced user accounting
– New Eye catching themes
– Hang time ratio improved
– Clear type view
– New icon sets
– New Sound schemes
– New Registry settings
– Added best shortcut styles
– Improved application interface
– Add desktop icon settings
– Enable AVALON effects
– Added RUN on start menu
– Add change theme
– Add change wallpaper
– Enable Clear Type Tuning
– Enable DVD in media player
– Enable Glass Effect(WDM) without graphics card
– Enable MP3 Encoding on right click
– Enable slow motion windows effects
– Enable status bar in notepad
– Get rid of windows mail splash
– Give your self permission to modify all
– Grant full admin control
– DiLshad Sys Site direct link from right click (Firefox needed)
– Removed Action center Icon
– Windows speed tweaking
– Wait to kill service – 2000
– Low level hooks time out – 1000
– Hang application time out – 1000
– Menu show delay – 0
– No low disk space warning
– Process Schedule 1st Program
– Mouse Speed Increased
– Hang Ratio Decreased
– Fast Shut Down And Login
– Down Power After Shut Down
– Touch Screen Feature Added
– Grant Admin control on Right Click
– Add Admin Tools on Desktop Context Menu
– Add manage on Desktop Context Menu
– Add Move to Folder on Desktop Context Menu
– small Taskbar Icon
– Removed mail Splash
– Detailed Shut Down And Login
– Blocked Negative DNS Entery
– turn Off System Beep
– Turn off low Disk
– Add Copy To Folder on Desktop Context Menu
– Add Task Manager on Desktop Context Menu
– Add Take Ownship on Desktop Context Menu
– Add Register and Unregister to .dll OCX Context Menu
– 500ms Delay Aero
– Larger Taskbar Previews
– Removed Action center icon

Download it From Here

Use your own Voice to control your Computer

e-Speaking: Control Your PC Through Your Voice

An easy software solution to enable you to control your computer, dictate emails and letters, and have the computer read documents back to you. e-Speaking – Voice Recognition software using your voice to command and control your computer. Reduce or eliminate mouse clicks or keyboard input. Use it to enhance your computing experience by providing an additional input to the computer.

What is Speech Recognition & Voice Recognition?

These are exciting technologies that change the way you interact with your computer. Now you can speak to your computer and it can speak back. The speech that you and your computer exchange is scripted. In other words, you can’t just ask your computer how he/she is feeling? Rather, you can talk to your computer using a set of pre-defined commands and instructions (i.e., a script). Your computer will respond in the same way (also using a scripted language). For example, you can say: “File Open”, and the computer would respond: “Select the file”. Or you can say: “Edit Find” and the computer would ask: “Find What?”.

Click here to download E-Speaking